Respect system pressure
R410A systems operate at higher pressures than many older R22 platforms. Use correctly rated service equipment.
A CLOSER LOOK
PRODUCT DETAILS & SPECIFICATIONS
COMFORT COOLING • A1
Service-ready supply for compatible high-pressure systems
R410A is a widely used blend for compatible residential and commercial air-conditioning and heat-pump equipment. The 25 lb cylinder is sized for professional maintenance, repair and charging work where the equipment nameplate specifically calls for R410A.
Net content25 lb / 11.3 kg
Safety classA1 • non-flammable
CompositionR32 / R125
Primary fitR410A A/C & heat pumps
Know exactly what you are ordering
Clear identification matters. Compare these details with the equipment nameplate, service documentation and cylinder label before connecting service tools.
| Refrigerant designation | R410A |
|---|---|
| Refrigerant family | HFC blend |
| Blend composition by weight | R32 / R125 — 50% / 50% |
| Net refrigerant weight | 25 lb / 11.3 kg |
| Safety classification | A1 — lower toxicity, no flame propagation |
| Typical equipment | Compatible residential and commercial A/C and heat-pump systems |
| Cylinder format | Sealed steel cylinder |
| Intended user | Qualified HVAC/R professionals |
Built for the correct system—not every system
Common compatible work
- Split and packaged air-conditioning equipment labeled for R410A
- Compatible residential and commercial heat pumps
- Approved rooftop and light-commercial comfort systems
- Professional repair, maintenance and commissioning
Confirm before ordering
- The equipment nameplate calls for R410A
- Service hoses, gauges and recovery equipment are rated for R410A operating pressures
- The correct lubricant and charge quantity are confirmed
- The system has been leak-checked and evacuated according to the manufacturer procedure
Plan the charge before opening the valve
Preserve composition
For consistent blend composition, follow accepted liquid-charging practice and the equipment manufacturer instructions.
Charge by weight
Use an accurate scale and the nameplate or service-manual charge specification instead of relying on pressure alone.
Compatibility is mandatory
Use only in systems identified for R410A. Do not add it to R22, R407C, R32, R454B or any other refrigerant circuit, and do not treat it as a drop-in substitute without an approved engineering procedure.
!
Restricted refrigerant sale
Bulk refrigerant sales in the United States are restricted. Proof of the applicable Section 608 or Section 609 technician certification—or documentation that the purchaser employs a properly certified technician—may be required before fulfillment. The purchaser is responsible for satisfying federal, state and local rules for purchase, transport, storage and use.
S
Handling and storage
Secure upright in a cool, dry and ventilated area. Protect the valve, avoid excessive heat and review the product label and safety data sheet before use. Refrigerant can displace oxygen, cause cold burns and create dangerous pressure if mishandled. Never intentionally vent refrigerant.
01SHIPPINGReview destination eligibility, delivery conditions, and the current Shipping Policy before ordering.
02COMPATIBILITYConfirm refrigerant type, system requirements, and container quantity before purchase.
03ORDER SUPPORTContact Comocean Cycles when you need help with product or order information.